• 0

Project Consultancy, Reports & Profiles

Best Business Opportunities in Mizoram - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

 

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

 

Reasons for buying our reports:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

• This report provides vital information on the product like its characteristics and segmentation

• This report helps you market and place the product correctly by identifying the target customer group of the product 

• This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

• The report provides a glimpse of government regulations applicable on the industry

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

• Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

• We use reliable sources of information and databases. And information from such sources is processed by us and included in the report


We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Sort by :
Wood Pellets Production from Sawdust
Wood Pellets Production from Sawdust

Wood Pellets Production from Sawdust. Earn Money from Wood Waste (Sawdust). Turning Sawdust into Briquettes... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Nylon Zip Fasteners
Nylon Zip Fasteners

Zips are manufactured using bead technology, where profile metal elements (teeth) are clamped on woven and dyed textile tap... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Aluminium Bottles (Cold Extrusion of Aluminium)
Aluminium Bottles (Cold Extrusion of Aluminium)

An aluminium bottle is a bottle made of aluminium (or aluminum, in American English). In some countries, it is also referred to as a bottle can. It... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
How to Start Food Packaging Foil Manufacturing Business
How to Start Food Packaging Foil Manufacturing Business

How to Start Food Packaging Foil Manufacturing Business. Production of Aluminium Foil - Big Profit Industry... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Ready Mix Concrete with Concrete Blocks
Ready Mix Concrete with Concrete Blocks

Ready mix concrete has advantages in the area where immediate requirement of concrete mixture like in the preparation of br... Read More

Capacity :
Ready Mix Concrete : 300 Cu.Mtrs /day Concrete Blocks (Size 400x100x200 mm) : 250 Cu.Mtrs
Plant and Machinery cost:
83.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
69.00 %
TCI :
0.00 Lakhs
Cost of Project :
586.00Lakhs
Add To Inquiry Basket
Plastic Pyrolysis Waste Plastic to Oil Conversion
Plastic Pyrolysis Waste Plastic to Oil Conversion

Plastics have become an indispensable part in today’s world. Due to their light weight, durability, energy efficiency... Read More

Capacity :
Pyrolysis Oil : 10 MT/Day Carbon (by product) : 3 MT/Day Gas (by product) : 2 MT/Day
Plant and Machinery cost:
118.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
63.00 %
TCI :
0.00 Lakhs
Cost of Project :
446.00Lakhs
Add To Inquiry Basket
Betel Nut (Supari) Processing
Betel Nut (Supari) Processing

Areca nut is the nut of areca palm. Biological name of areca nut palm is Areca catechu and it is a member of t... Read More

Capacity :
Supari : 500 Kgs. /Day Tannin : 33 Kgs. /Day Brushes/Rope : 250 Kgs. /Day Pan Masala : 500 Kgs.
Plant and Machinery cost:
42.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
58.00 %
TCI :
0.00 Lakhs
Cost of Project :
191.00Lakhs
Add To Inquiry Basket
IV Fluids (BFS Technology)
IV Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These flui... Read More

Capacity :
48,000 Bottles/Day 500 ml each bottle
Plant and Machinery cost:
253.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
52.00 %
TCI :
0.00 Lakhs
Cost of Project :
834.00Lakhs
Add To Inquiry Basket
Craft Beer
Craft Beer

Craft beer is a type of beer brewed in a traditional manner and usually produced in smaller quantities than that of the conventional beer. The prod... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Agricultural Warehouse with Cold Storage
Agricultural Warehouse with Cold Storage

Warehousing plays a very vital role in promoting agriculture marketing, rural banking and financing and ensuring Food Security in the county. It en... Read More

Capacity :
Sacks Store in Warehouse : 50000 Units /Day Cold Storage : 65 Units /Day
Plant and Machinery cost:
276.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
21.00%
Break Even Point (BEP):
46.00 %
TCI :
0.00 Lakhs
Cost of Project :
1468.00Lakhs
Add To Inquiry Basket
Aluminium Rolling Mill
Aluminium Rolling Mill

Aluminium foil is aluminium prepared in thin metal leaves, with a thickness less than 0.2 millimetres (8 mils), thinner gau... Read More

Capacity :
Aluminium Foil Food Grade (thickness 0.006 mm to 0.150 mm) : 24 MT/Day
Plant and Machinery cost:
310.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
52.00 %
TCI :
0.00 Lakhs
Cost of Project :
1252.00Lakhs
Add To Inquiry Basket
School (CBSE Pattern)
School (CBSE Pattern)

The importance of education was well recognized in India, ‘Swadeshepujyate raja, vidwansarvatrapujyate’ “... Read More

Capacity :
KG to 12th Standard Students : 2000 Students/Annum
Plant and Machinery cost:
63.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
13.00%
Break Even Point (BEP):
47.00 %
TCI :
0.00 Lakhs
Cost of Project :
1098.00Lakhs
Add To Inquiry Basket
Curcumin Extraction Unit
Curcumin Extraction Unit

Curcumin is the main biologically active phytochemical compound of turmeric. It is extracted, concentrated, standard... Read More

Capacity :
Curcumin Powder : 350 Kgs/day Turmeric Oil : 350 Kgs/day
Plant and Machinery cost:
593.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
55.00 %
TCI :
0.00 Lakhs
Cost of Project :
1016.00Lakhs
Add To Inquiry Basket
PVC Pipes
PVC Pipes

PVC pipes are produced by extrusion process followed by calibration to ensure maintenance of accurate internal dia w... Read More

Capacity :
6000 Meters/ day
Plant and Machinery cost:
73.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
55.00 %
TCI :
0.00 Lakhs
Cost of Project :
434.00Lakhs
Add To Inquiry Basket
Aluminium Collapsible Tubes
Aluminium Collapsible Tubes

A collapsible tube is defined as a cylinder of pliable metal that can be sealed in such a manner that its contents, althoug... Read More

Capacity :
300000 Nos./day
Plant and Machinery cost:
4684.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
10.00%
Break Even Point (BEP):
46.00 %
TCI :
0.00 Lakhs
Cost of Project :
10012.00Lakhs
Add To Inquiry Basket
Ghee Manufacturing Unit
Ghee Manufacturing Unit

Ghee, also referred to as clarified butter, is a good alternative to cooking oil and is often used in Indian and Middle Eas... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Polypropylene Measuring Cup
Polypropylene Measuring Cup

Polypropyle... Read More

Capacity :
1300000 No.s/day, 10ml.size cup
Plant and Machinery cost:
9.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
50.00%
Break Even Point (BEP):
34.00 %
TCI :
0.00 Lakhs
Cost of Project :
60.00Lakhs
Add To Inquiry Basket
Hydraulic Hose  with Crimping Facility of Hose End Fittings
Hydraulic Hose with Crimping Facility of Hose End Fittings

A hose is a flexible hollow tube designed to carry fluids from one location to another. Hoses are also sometimes called ... Read More

Capacity :
1,000Pcs./Day
Plant and Machinery cost:
74.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
66.00 %
TCI :
0.00 Lakhs
Cost of Project :
211.00Lakhs
Add To Inquiry Basket
Adhesive (Fevicol Type) Water Proofing Grade
Adhesive (Fevicol Type) Water Proofing Grade

Fevicol type adhesives come under the category of synthetic resins and latex adhesives are made from polyvinyl acetate is a therm... Read More

Capacity :
3MT/Day
Plant and Machinery cost:
38.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
59.00 %
TCI :
0.00 Lakhs
Cost of Project :
183.00Lakhs
Add To Inquiry Basket
IV Fluids
IV Fluids

I.V. Fluids

Intravenous fluids are fluid... Read More

Capacity :
27,000,000 Bottles/annum
Plant and Machinery cost:
476.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
5.00 %
TCI :
0.00 Lakhs
Cost of Project :
1060.00Lakhs
Add To Inquiry Basket
HDPE PP Woven Fabric
HDPE PP Woven Fabric

HDPE/PP Woven Fabric

Woven is a me... Read More

Capacity :
8.4 MT/Day
Plant and Machinery cost:
500.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
60.00 %
TCI :
0.00 Lakhs
Cost of Project :
923.00Lakhs
Add To Inquiry Basket
Polymer Pencil
Polymer Pencil

A pencil is a writing instrument or art medium constructed of a narrow, solid pigment core inside a protective casing which... Read More

Capacity :
67 Th. Pcs. /day
Plant and Machinery cost:
116.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
71.00 %
TCI :
0.00 Lakhs
Cost of Project :
282.00Lakhs
Add To Inquiry Basket
Nuts & Bolts (M S Fasteners)
Nuts & Bolts (M S Fasteners)

A fastener is a connective mechanism that mechanically joins or affixes two or more objects toget... Read More

Capacity :
Mild Steel/HT Bolts : 625 Kgs. /Day Mild Steel/HT Nuts : 125 Kgs. /Day
Plant and Machinery cost:
33.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
71.00 %
TCI :
0.00 Lakhs
Cost of Project :
54.00Lakhs
Add To Inquiry Basket
Protein Bar
Protein Bar

Good nutrition practices help to fuel physical activity, in addition to sustaining normal bodily functions and the growth, ... Read More

Capacity :
40,000. Pcs. per day
Plant and Machinery cost:
129.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
31.00%
Break Even Point (BEP):
50.00 %
TCI :
0.00 Lakhs
Cost of Project :
644.00Lakhs
Add To Inquiry Basket
Mosquito Repellent Liquidator
Mosquito Repellent Liquidator

The mosquito repellent consists of a liquid mix that gets converted into vapors on moderate heating. Thes... Read More

Capacity :
Mosquito Repellent Liquidator, Vaporiser 50 ml size PET Bottle: 2,400,000 Nos/annum
Plant and Machinery cost:
18.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
39.00 %
TCI :
0.00 Lakhs
Cost of Project :
291.00Lakhs
Add To Inquiry Basket
PUFFED RICE (Muri)
PUFFED RICE (Muri)

Puffed Rice is a commonly consumed commodity as a pastime snack. It can be used in combination with nuts such as groundnut ... Read More

Capacity :
1200 MT/annum
Plant and Machinery cost:
6.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
74.00 %
TCI :
0.00 Lakhs
Cost of Project :
28.00Lakhs
Add To Inquiry Basket
Multiblade Safety Razor
Multiblade Safety Razor

A safety razor is a shaving implement with a protective device positioned between the edge of the blade and the skin. The i... Read More

Capacity :
Multiblade Safety Razor (2 Blade): 86,400,000 Nos/annum
Plant and Machinery cost:
313.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
30.00%
Break Even Point (BEP):
60.00 %
TCI :
0.00 Lakhs
Cost of Project :
826.00Lakhs
Add To Inquiry Basket
Spices in Pouch Packing
Spices in Pouch Packing

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, and bulb) of plants used as a flavoring or seasoning, alt... Read More

Capacity :
360,000 kgs./annum
Plant and Machinery cost:
26.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
44.00 %
TCI :
0.00 Lakhs
Cost of Project :
181.00Lakhs
Add To Inquiry Basket
Tennis Ball  (Used in Playing Cricket)
Tennis Ball (Used in Playing Cricket)

Tennis ball cricket is a variant of cricket popular in the Indian subcontinent, and a very South Asians living in the US &a... Read More

Capacity :
1,500,000 NOS/annum
Plant and Machinery cost:
39.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
56.00 %
TCI :
0.00 Lakhs
Cost of Project :
164.00Lakhs
Add To Inquiry Basket
Calcium Silicate Insulation Board
Calcium Silicate Insulation Board

Calcium silicate board is an asbestos-free thermal insulation product that can withstand continuous high operating temperatures. ... Read More

Capacity :
50,000 Sq.MT/annum
Plant and Machinery cost:
74.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
24.00%
Break Even Point (BEP):
68.00 %
TCI :
0.00 Lakhs
Cost of Project :
316.00Lakhs
Add To Inquiry Basket
Ginger Oil
Ginger Oil

Ginger products, such as ginger oil is internationally commercialized for use in food and pharmaceutical processing. To ... Read More

Capacity :
45,000 Kgs/annum
Plant and Machinery cost:
103.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
62.00 %
TCI :
0.00 Lakhs
Cost of Project :
274.00Lakhs
Add To Inquiry Basket
Fusion Bonded Epoxy Coating (FBE) on TMT Bars
Fusion Bonded Epoxy Coating (FBE) on TMT Bars

Fusion bonded epoxies are one part, heat curable, thermosetting epoxy utilized for corrosion protection. FBEs are applie... Read More

Capacity :
72,000 MT/annum
Plant and Machinery cost:
768.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
2932.00Lakhs
Add To Inquiry Basket
Vacuum Fried Snacks
Vacuum Fried Snacks

Vacuum Fried Snacks: Vacuum Fried Vegetable Chips  (Sweet Potato, Beans and Beetroot) Manufacturing Pl... Read More

Capacity :
Sweet potato : 120 kg/day Beat root : 80 kg/day Beans chips : 266 kg/day
Plant and Machinery cost:
83.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
59.00 %
TCI :
0.00 Lakhs
Cost of Project :
209.00Lakhs
Add To Inquiry Basket
Curcumin Extraction Unit
Curcumin Extraction Unit

Curcumin is the main biologically active phytochemical compound of Turmeric. It is extracted, concentrated, standardized an... Read More

Capacity :
Curcumin Powder :15,000 Kgs/annum Turmeric Oil : 15,000 Kgs/annum Deoiled Turmeric
Plant and Machinery cost:
150.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
58.00 %
TCI :
0.00 Lakhs
Cost of Project :
355.00Lakhs
Add To Inquiry Basket
NPK Complex Organic Fertilizer Plant
NPK Complex Organic Fertilizer Plant

Feeding a population of 9 billion pe... Read More

Capacity :
3600 MT/annum
Plant and Machinery cost:
177.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.00%
Break Even Point (BEP):
50.00 %
TCI :
498.00 Lakhs
Cost of Project :
498.00Lakhs
Add To Inquiry Basket
Adhesive Based on Epoxy Resin (2 Pack)
Adhesive Based on Epoxy Resin (2 Pack)

The adhesive industry has seen signi... Read More

Capacity :
Pure Epoxy Resin with Curing Agent : 9000000 Kgs/Annum
Plant and Machinery cost:
162.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
32.00%
Break Even Point (BEP):
60.00 %
TCI :
698.00 Lakhs
Cost of Project :
698.00Lakhs
Add To Inquiry Basket
E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, e-waste, e-scrap, or Waste Electrical and Electronic Equipment (WEEE) is a description of surplus, obsolete, broken or discarded... Read More

Capacity :
Copper Wire: 500mt/annum Plastic Granules: 2230mt/annum Glass: 970mt/annum Ferrous Metal: 800mt/annu
Plant and Machinery cost:
132.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
54.00 %
TCI :
0.00 Lakhs
Cost of Project :
51800000.00Lakhs
Add To Inquiry Basket
Pan Masala
Pan Masala

The custom of chewing breath fresheners after meals has a very long history, particularly in India. Pan Masala is a balanced mixture of betel leaf ... Read More

Capacity :
Sada Pan Masala: 99000kgs/annum Meetha Pan Masala: 99000kgs/annum Zarda Pan Masala: 102000kgs/annum
Plant and Machinery cost:
35.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
54.00 %
TCI :
0.00 Lakhs
Cost of Project :
226.00Lakhs
Add To Inquiry Basket
Paracetamol
Paracetamol

Paracetamol, also known as acetaminophen or APAP, is a medication used to treat pain and fever. It is typically used for mild to moderate pain. It ... Read More

Capacity :
Paracetamol Tablets: 1500mt/annum Paracetamol Powder: 420mt/annum
Plant and Machinery cost:
349.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
46.00 %
TCI :
0.00 Lakhs
Cost of Project :
863.00Lakhs
Add To Inquiry Basket
Floral Foam
Floral Foam

Floral foam is a dense, lightweight and porous material that can be cut into virtually any shape. It holds its shape when w... Read More

Capacity :
3,600,000 Pcs/annum
Plant and Machinery cost:
69.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
47.00 %
TCI :
0.00 Lakhs
Cost of Project :
270.00Lakhs
Add To Inquiry Basket
Wire Nail
Wire Nail

Wire nail is very well known item, as it is very common product, which is normally used in daily life. It is used for fa... Read More

Capacity :
Wire Nail : 369,600 Kgs/annum Wire Scrap : 34,800 Kgs/annum
Plant and Machinery cost:
11.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.00%
Break Even Point (BEP):
53.00 %
TCI :
0.00 Lakhs
Cost of Project :
59.00Lakhs
Add To Inquiry Basket
Dal Mill  (Pulses)
Dal Mill (Pulses)

India is the still by and large vegetarian in dietary habit and heavily depends upon vegetative source to meet out its dail... Read More

Capacity :
Pigeon peas : 4,000 MT/ annum Lentil: 4,000 MT/annum Chickpeas: 4,000 MT/annum
Plant and Machinery cost:
146.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
65.00 %
TCI :
0.00 Lakhs
Cost of Project :
542.00Lakhs
Add To Inquiry Basket
Paper Cartons
Paper Cartons

The materials now available for packaging are paper and paper products, metal containers and foils, glass, plastics-rigid and flexible, cellu... Read More

Capacity :
600,000,000 Nos./Annum
Plant and Machinery cost:
75.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
34.18%
Break Even Point (BEP):
40.00 %
TCI :
0.00 Lakhs
Cost of Project :
1474.00Lakhs
Add To Inquiry Basket
Poly Aluminium Chloride (Water Treatment Grade)
Poly Aluminium Chloride (Water Treatment Grade)

Poly aluminium chloride (PAC) is a general name given to poly aluminium chloride compounds, namely poly aluminium chloride ... Read More

Capacity :
Poly Aluminium Chloride Liquid Form : 16,500 MT/Annum Poly Aluminium Chloride Powder Form :
Plant and Machinery cost:
1266.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
55.00 %
TCI :
0.00 Lakhs
Cost of Project :
2418.00Lakhs
Add To Inquiry Basket
Grain Based Alcohol Distillery
Grain Based Alcohol Distillery

The alcohol industry is the commercial industry involved in the manufacturing, distribution, and sale of alcoholic beverage... Read More

Capacity :
Extra Neutral Alcohol (ENA) : 15,000KLs/Annum Distilleries Dry Grain with Solubles (DDGS) by produ
Plant and Machinery cost:
4637.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
24.00%
Break Even Point (BEP):
48.00 %
TCI :
0.00 Lakhs
Cost of Project :
6572.00Lakhs
Add To Inquiry Basket
Spices (Masala)
Spices (Masala)

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, and bulb) of plants used as a flavoring or seasoning, a... Read More

Capacity :
Chole Masala : 400,00 Kgs/annum Sambhar Masala : 400,00 Kgs/annum Garm Masala : 400,00 Kgs/a
Plant and Machinery cost:
90.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
36.00 %
TCI :
0.00 Lakhs
Cost of Project :
1431.00Lakhs
Add To Inquiry Basket
Hydroponic Green House Farming
Hydroponic Green House Farming

Hydroponics is a system of agriculture that utilizes nutrient-laden water rather than soil for plant nourishment. The re-... Read More

Capacity :
Tomatoes: 800 MT/annum Peas: 36 MT/annum Cucumber : 56 MT/annum Beans : 80 MT/annum
Plant and Machinery cost:
23.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
489.00Lakhs
Add To Inquiry Basket
Rice Mill, Rice Bran Oil  with  Captive Power Plant  (Integrated Unit)
Rice Mill, Rice Bran Oil with Captive Power Plant (Integrated Unit)

Paddy is the most important and extensively grown food crop in the World. Rice grain (Oryza sativa) along with hulls/husk i... Read More

Capacity :
Rice:1,170,000 MT/annum Rice Bran Oil :50,000 MT/annum Deoiled Rice Bran Cake :187,500 MT/annum Sal
Plant and Machinery cost:
23800.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
44.00 %
TCI :
0.00 Lakhs
Cost of Project :
56500.00Lakhs
Add To Inquiry Basket
Carbonated and Non Carbonated Drinks (Non-Alcoholic)
Carbonated and Non Carbonated Drinks (Non-Alcoholic)

 

A carbonated drink is a drink that bubbles and fizzes with carbon dioxide gas... Read More

Capacity :
Carbonated Drinks: 25000 Bottles/Day •Non Carbonated Drinks: 25000 Bottles/Day
Plant and Machinery cost:
249.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
48.00 %
TCI :
1162.00 Lakhs
Cost of Project :
1162.00Lakhs
Add To Inquiry Basket
Flavoured Nuts
Flavoured Nuts

The cashew nut is served as a snack or used in recipes, like other nuts, although it is actually a seed. The cashew apple is a fruit, whose pulp ca... Read More

Capacity :
Flavoured Cashew Nut:500 kgs/Day •Flavoured Peanut:500 kgs/Day
Plant and Machinery cost:
117.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.46%
Break Even Point (BEP):
57.66 %
TCI :
215.00 Lakhs
Cost of Project :
215.00Lakhs
Add To Inquiry Basket
MEDIUM DENSITY FIBERBOARD
MEDIUM DENSITY FIBERBOARD

Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include parti... Read More

Capacity :
Medium Density Fiberboard (MDF) : 50001 CBM/Annum
Plant and Machinery cost:
2034.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
44.00 %
TCI :
0.00 Lakhs
Cost of Project :
3873.00Lakhs
Add To Inquiry Basket
HDPE, PP Woven Fabric  From Tape Line using Circular Looms and Sacks Making  with Lamination of BOPP, BOPET, LDPE and Printing
HDPE, PP Woven Fabric From Tape Line using Circular Looms and Sacks Making with Lamination of BOPP, BOPET, LDPE and Printing

Woven is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. Polypropylene, whi... Read More

Capacity :
HDPE/PP Woven Fabric: 7.2MT/day HDPE/PP Woven Bags for fertilizer: 102857 Nos/day
Plant and Machinery cost:
1507.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
21.00%
Break Even Point (BEP):
57.00 %
TCI :
0.00 Lakhs
Cost of Project :
2536.00Lakhs
Add To Inquiry Basket
Khaini, Zarda & Gutka
Khaini, Zarda & Gutka

Tobacco is an important commercial crop cultivated in an area of 0.4 million ha producing annually around 700 million kg of cured leaf out of which... Read More

Capacity :
Khaini: 500 kg/day, Zarda: 500 kg/day, Gutka: 500kg/day
Plant and Machinery cost:
51.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
31.00%
Break Even Point (BEP):
49.00 %
TCI :
0.00 Lakhs
Cost of Project :
318.00Lakhs
Add To Inquiry Basket
MEDIUM DENSITY FIBERBOARD
MEDIUM DENSITY FIBERBOARD

Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include parti... Read More

Capacity :
400CBM/day
Plant and Machinery cost:
6866.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
42.00 %
TCI :
9559.00 Lakhs
Cost of Project :
9559.00Lakhs
Add To Inquiry Basket
Particle Board (Wood Base)
Particle Board (Wood Base)

Particle Boards are a relatively new type of engineered wood product.It is cheaper, denser and more uniform than conventional wood and plywood. The... Read More

Capacity :
600Nos/day
Plant and Machinery cost:
452.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.00%
Break Even Point (BEP):
54.00 %
TCI :
1066.00 Lakhs
Cost of Project :
1066.00Lakhs
Add To Inquiry Basket
Glass Sheet
Glass Sheet

It is difficult to conceive the cont... Read More

Capacity :
Glass Sheet: 1000500 Sq.Mt/annum
Plant and Machinery cost:
919.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
14.00%
Break Even Point (BEP):
60.00 %
TCI :
1742.00 Lakhs
Cost of Project :
1742.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
A Business Plan For Sanit... Sanitary Napkins 4,800 PKTS per day 27.00 84.00
Start Manufacturing Of Bl... - 32.00 985.00
Start Production Of Potat... Potato Flakes 2 MT Per Day 25.00 563.00
Setup Manufacturing Unit ... Saddle 7,000 Unit Per Day Pedals 10,000 Unit Per Day 31.00 575.00
Opportunity in Sodium Sul... Sodium Sulfide Flakes 10,000 MT Per Annum 30.00 1426.00
Business Plan for Lithium... - 29.00 812.00
Start Manufacturing Busin... Cargo Containers (Size 20 Feet) 34 Nos Per Day 29.00 1992.00
Start Cutting and Grindin... Cutting Disc Size: (115 mm x 1 mm) 2,000 Pcs Pr Day Grinding Disc (115 mm x 6 mm) 2,000 Pcs Pr Day 28.00 423.00
Mink Blankets Production - 27.00 6000.00
A Business Plan for Micro... Micronutrient Fortified Energy Dense Food 100 MT Per Day 28.00 3500.00
Start Business of Caustic... - 25.00 56500.00
Start Crumb Rubber Powder... Crumb Rubber Powder 10 MT Per Day By Product Steel Wire 2 MT Per Day 26.00 303.00
Start Rice Milling Plant - 28.00 824.00
Start Manufacturing of Wo... Wooden Pencils 69,444 Gross Per Day 28.00 2400.00
A Business Plan for Monoc... Monocrystalline Silicon Ingots 400 Kgs Per Day 28.00 555.00
A Business Plan for Fiber... Fiberglass Tape 24,000 Mtrs. Per Day 28.00 442.00
Setup Plant of Compressed... - 28.00 950.00
Ferrochrome Manufacturing... Ferrochrome 135 MT Per Day 10.00 40400.00
Start a Business Of LPG C... LPG Cylinders (14.20 Kgs Size) 3,334.0 Nos. per day LPG Cylinders (19 Kgs Size) 3,334.0 Nos. per day 32.00 3475.00
Start Banana Wine Product... Banana Wine (750 ml size Bollte) 2,960 Bottles per day 25.00 1189.00
Activated Carbon From Ric... Activated Carbon 2,000 Kg Per Day 25.00 606.00
Set Up Activated Carbon F... Activated Carbon 2,000 Kg Per Day 25.00 606.00
Set Up Business of Flat G... 0 0.00 0.00
Set Up Business of Double... 0 0.00 0.00
A Business Plan for Bio-D... 10,000 MT Per Annum 28.00 8100.00
Sulphur Powder Manufactur... 20,000 MT Per Annum 24.00 4318.00
Manufacturing Business Gi... 60,000 Kg. Per Annum , 1,44,000 Kg. Per Annum 28.00 528.00
Start a Business of Manuf... 1,500 Dz. Per Annum 35.00 34.00
Start Activated Carbon fr... 0 0.00 0.00
Most Demandable Business ... 0 0.00 0.00
12345678910...

Showing 541 - 600 of 2596 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

And before diversifying/venturing into any product, wish to study the following aspects of the identified product:
  • Good Present/Future Demand
  • Export-Import Market Potential
  • Raw Material & Manpower Availability
  • Project Costs and Payback Period

We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

Reasons for buying the report:
  • This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.
  • This report provides vital information on the product like its definition, characteristics and segmentation.
  • This report helps you market and place the product correctly by identifying the target customer group of the product.
  • This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.
  • The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.
The report contains all the data which will help an entrepreneur find answers to questions like:
  • Why I should invest in this project?
  • What will drive the growth of the product?
  • What are the costs involved?
  • What will be the market potential?

The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product. The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.

  • Our research reports broadly cover Indian markets, present analysis, outlook and forecast.
  • The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players.
  • We use reliable sources of information and databases. And information from such sources is processed by us and included in the report.

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

Introduction
  • Project Introduction
  • Project Objective and Strategy
  • Concise History of the Product
  • Properties
  • BIS (Bureau of Indian Standards) Provision & Specification
  • Uses & Applications
Market Study and Assessment
  • Current Indian Market Scenario
  • Present Market Demand and Supply
  • Estimated Future Market Demand and Forecast
  • Statistics of Import & Export
  • Names & Addresses of Existing Units (Present Players)
  • Market Opportunity
Raw Material
  • List of Raw Materials
  • Properties of Raw Materials
  • Prescribed Quality of Raw Materials
  • List of Suppliers and Manufacturers
Personnel (Manpower) Requirements
  • Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel
Plant and Machinery
  • List of Plant & Machinery
  • Miscellaneous Items
  • Appliances & Equipments
  • Laboratory Equipments & Accessories
  • Electrification
  • Electric Load & Water
  • Maintenance Cost
  • Sources of Plant & Machinery (Suppliers and Manufacturers)
Manufacturing Process and Formulations
  • Detailed Process of Manufacture with Formulation
  • Packaging Required
  • Process Flow Sheet Diagram
Infrastructure and Utilities
  • Project Location
  • Requirement of Land Area
  • Rates of the Land
  • Built Up Area
  • Construction Schedule
  • Plant Layout and Requirement of Utilities
Assumptions for Profitability workings
Plant Economics
Production Schedule
Land & Building
  • Factory Land & Building
  • Site Development Expenses
Plant & Machinery
  • Indigenous Machineries
  • Other Machineries (Miscellaneous, Laboratory etc.)
Other Fixed Assets
  • Furniture & Fixtures
  • Pre-operative and Preliminary Expenses
  • Technical Knowhow
  • Provision of Contingencies
Working Capital Requirement Per Month
  • Raw Material
  • Packing Material
  • Lab & ETP Chemical Cost
  • Consumable Store
Overheads Required Per Month And Per Annum
  • Utilities & Overheads (Power, Water and Fuel Expenses etc.)
  • Royalty and Other Charges
  • Selling and Distribution Expenses
Salary and Wages
Turnover Per Annum
Share Capital
  • Equity Capital
  • Preference Share Capital
Annexure 1:: Cost of Project and Means of Finance
Annexure 2:: Profitability and Net Cash Accruals
  • Revenue/Income/Realisation
  • Expenses/Cost of Products/Services/Items
  • Gross Profit
  • Financial Charges
  • Total Cost of Sales
  • Net Profit After Taxes
  • Net Cash Accruals
Annexure 3 :: Assessment of Working Capital requirements
  • Current Assets
  • Gross Working. Capital
  • Current Liabilities
  • Net Working Capital
  • Working Note for Calculation of Work-in-process
Annexure 4 :: Sources and Disposition of Funds
Annexure 5 :: Projected Balance Sheets
  • ROI (Average of Fixed Assets)
  • RONW (Average of Share Capital)
  • ROI (Average of Total Assets)
Annexure 6 :: Profitability ratios
  • D.S.C.R
  • Earnings Per Share (EPS)
  • Debt Equity Ratio
Annexure 7 :: Break-Even Analysis
  • Variable Cost & Expenses
  • Semi-Var./Semi-Fixed Exp.
  • Profit Volume Ratio (PVR)
  • Fixed Expenses / Cost
  • B.E.P
Annexure 8 to 11:: Sensitivity Analysis-Price/Volume
  • Resultant N.P.B.T
  • Resultant D.S.C.R
  • Resultant PV Ratio
  • Resultant DER
  • Resultant ROI
  • Resultant BEP
Annexure 12 :: Shareholding Pattern and Stake Status
  • Equity Capital
  • Preference Share Capital
Annexure 13 :: Quantitative Details-Output/Sales/Stocks
  • Determined Capacity P.A of Products/Services
  • Achievable Efficiency/Yield % of Products/Services/Items
  • Net Usable Load/Capacity of Products/Services/Items
  • Expected Sales/ Revenue/ Income of Products/ Services/ Items
Annexure 14 :: Product wise domestic Sales Realisation
Annexure 15 :: Total Raw Material Cost
Annexure 16 :: Raw Material Cost per unit
Annexure 17 :: Total Lab & ETP Chemical Cost
Annexure 18 :: Consumables, Store etc.,
Annexure 19 :: Packing Material Cost
Annexure 20 :: Packing Material Cost Per Unit
Annexure 21 :: Employees Expenses
Annexure 22 :: Fuel Expenses
Annexure 23 :: Power/Electricity Expenses
Annexure 24 :: Royalty & Other Charges
Annexure 25 :: Repairs & Maintenance Exp.
Annexure 26 :: Other Mfg. Expenses
Annexure 27 :: Administration Expenses
Annexure 28 :: Selling Expenses
Annexure 29 :: Depreciation Charges – as per Books (Total)
Annexure 30 :: Depreciation Charges – as per Books (P & M)
Annexure 31 :: Depreciation Charges - As per IT Act WDV (Total)
Annexure 32 :: Depreciation Charges - As per IT Act WDV (P & M)
Annexure 33 :: Interest and Repayment - Term Loans
Annexure 34 :: Tax on Profits
Annexure 35 ::Projected Pay-Back Period And IRR